Re: Centos 5.1 installation problems -- couldn't find devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Thanks. Joseph,  my box actually has Windows XP pre-installed (instead of Vista).

So I'll check that option in my BIOS when I get back home, although I don't recall I've seen one.  I'll also send out an email to this list to ask if someone else has solved similar problem.

Let me know if there's other mailing list I can ask.


Thanks,

-Hui




On Mon, Mar 17, 2008 at 12:02 AM, Joseph L. Casale <jcasale@xxxxxxxxxxxxxxxxx> wrote:
>It seemed both attempts failed due to the installation program couldn't find either the SATA DVD drive or the SATA hard disk.  However,  it's hard to believe Centos 5.1 installation couldn't recognize >these two SATA devices.
>
>I'm now stuck.  Any suggestion or advice is much appreciated.

CentOS more than likely will recognize the devices once they are on a controller it recognizes :)
That model appears to use a recent Intel SATA controller (cmiiw) and is only sold with Vista. You could look at the bios and see if the Vendor enabled an option to adjust how the controller appears to the OS, look for a setting that says something like AHCI/Native/Legacy etc...

I'm sure someone here has used such a recent system and has a solution. I recall someone here or on another list suggesting some kernel parameters that might need to be passed.

jlc
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos



--
Regards,

-Hui
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux