RE: Recommendations for a "real RAID" 1 card on Centos box

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Therese Trudeau wrote:
> >>> This is getting OT and you are going to end up spending 
> >>> more on redundancy then if you just called Dell and ordered 
> >>> another computer.
> >> 
> >> I agree with you in that it's cheaper to buy another home 
> >> computer than to design a system with redundancy.
> >> However that new conputer I would order from Dell probabally 
> >> would not have the redundancy I need in a 
> >> a workstation, and I would just end up back where I started anyway. 
> > 
> > I think you missed my point. If workstation A fails, call Dell and
> > have another one overnighted, or call Dell today and order a second
> > workstation to have as a backup or act as a secondary workstation.
> > 
> > Their Vostros line is cheap (in appearance, components and price),
> > but is functional, performs well and did I say cheap already, so
> > you can get 2 for the price of 1 highly redundant system.
> 
> Ah I got it now thanks.
> 
> Does the Vostros come with either a bare metal restore tape 
> backup system or RAID
> ( which is required for my situation)? 

They will sell you the moon if you want, but let me give you
some practical advice. You seem like you are running your own
consulting business, so this advice will not only save you
time, but money which is key when running your own business.

Buy your computers with NO hardware RAID, your not setting
up high performance database systems for hundreds of users
here. Get systems with 2 identical internal 250GB SATA
drives and setup software RAID1 on them. Get an external
USB/Firewire drive, you can even get those in RAID1 too
and have automated dump scripts backup your data to it.

Install your Linux distro with common reproduceable options
using standard repos and document it.

Here's how I would setup the internal hard drives, can be
done easily through anaconda even with kickstart.

/dev/sda1 - 100MB RAID
/dev/sda2 - Rest of Disk RAID
/dev/sdb1 - 100MB RAID
/dev/sdb2 - Rest of Disk RAID

/dev/md0 - /dev/sda1 /dev/sdb1 RAID1, ext3, /boot
/dev/md1 - /dev/sda2 /dev/sdb2 RAID1, LVM

VG CentOS - PV /dev/md1

LV root - VG CentOS, 16GB, ext3, /
LV swap - VG CentOS, 4GB, swap
LV home - VG CentOS, 32GB, ext3, /home
LV work - VG CentOS, 64GB, ext3, /work

If the system crashes you can move your USB drive over to
the other system and restore there, and/or have rsync keep
the other system identical to the first. Setup NIS/NFS or
whatever to share the data/authentication information.

This setup will be more cost effective and faster then
what you are currently planning.

-Ross


______________________________________________________________________
This e-mail, and any attachments thereto, is intended only for use by
the addressee(s) named herein and may contain legally privileged
and/or confidential information. If you are not the intended recipient
of this e-mail, you are hereby notified that any dissemination,
distribution or copying of this e-mail, and any attachments thereto,
is strictly prohibited. If you have received this e-mail in error,
please immediately notify the sender and permanently delete the
original and any copy or printout thereof.

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux