few questions also
1/ what is different between vconfig and your configure to set it up the vlan?
2/ what is the different vlan and vlan trunking?
thank you again
"Miskell, Craig" <Craig.Miskell@xxxxxxxxxxxxxxxx> wrote:
> Hi all
>
> ls centos supporting vlan setup?
If by that you mean 802.1q trunking, then yes.
> ls it reliable?
Seems to be in my experience, but that's only limited so far.
> how can I do it?
Create multiple ifcfg files in /etc/sysconfig/network-scripts, e.g. for
multiple VLANs on eth0:
ifcfg-eth0
ifcfg-eth0.2
ifcfg-eth0.100
The number after the decimal is the VLAN id (default (1), 2 and 100
respectively above). In each file, add VLAN=yes. And don't forget to
turn on trunking on the switch to which you're attached. The network
startup scripts will then do the right thing.
Craig
=======================================================================
Attention: The information contained in this message and/or attachments
from AgResearch Limited is intended only for the persons or entities
to which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipients is prohibited by AgResearch
Limited. If you have received this message in error, please notify the
sender immediately.
=======================================================================
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
Be smarter than spam. See how smart SpamGuard is at giving junk email the boot with the All-new Yahoo! Mail
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
