Re: CentOS 5.1 Core 2 Duo Install freezes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



ICH7R + Intel® 82573

Memory:
Crucial 512Mb, 1Gb, 2Gb modules matched to above MB.

according to Intel, this chipset supports DDR2 667Mhz memory only. if
you're using two dimms they should be matched pairs for dual channel
operation?

Yes. I'm using matched pairs of DDR2 667Mhz. Hmmm. Actually, the Celeron's are using DDR2 533Mhz ... according to Crucial these work in this MB. Guess that's one more thing to try with the dual core processors.


Processors:
Intel Celeron 420 Conroe-L, 1.6GHz 512KB 64-bit
Intel Core 2 Duo E6320, 1.86Ghz 4Mb 64-bit
this is a 1066Mhz FSB CPU, not compatible with that chipset at least
according to Intel.

actually, reading the Intel datasheet, it looks like the 946 chipsets
were intended strictly as P4 chipsets, and Core2Duo support was an
afterthought.

I'd check with SuperMicro for more help on this.


http://www.supermicro.com/products/motherboard/Xeon3000/946/PDSBM-LN2+.cfm

Intel Pentium E2140 Allendale (Dual Core), 1.6GHz 1M 64-bit

this is a 800Mhz FSB CPU, it /should/ work.

Yes, but unfortunately has the exact same issues as the 1066Mhz Core2Duo's.



_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux