Alain Spineux wrote:
If I needed to remove a disc from a software mirror for a quick backup
before a test, how can I remove it cleanly so that it has a good copy of the
OS on it? If I use mdadm to fail then remove it, this would be done while
CentOS is running (It's a mirror of the system disc) and I suspect the data
on it would not be in a clean state?
Don't "fail" the disk, just remove it physicaly or in the BIOS, that
way it will be clean.
The way to make a filesystem clean is to unmount it while it is still
running. If it contains / or any filesystem containing open files,
you'll have to shut down. If you are able to unmount, you can
fail/remove with the mdadm command and if the drive is a hot-swappable
type you don't have to shut down.
Then if your test is successful, your disk will be re-syncronized as
soon as you put it back.
You may not want that. It's easy enough to "mdadm --add ..." to put it
back if you can figure out the underlying device name.
If your test fail you need to make your "saved" disk the good one.
I things "md" choose the disk with the last time stamp as the "master"
to replicate on the second one.
Then boot on the "saved" one, before to reboot and sync both.
I'm not sure if this is a timestamp or a count of clean shutdowns. Does
anyone know?
You could also try to change the partition system ID of your
partition(s) to something else than 8e, using fdisk.
FD is the 'raid autodetect' type. Setting the drive you don't want to
be the master to something else during boot, then later adding it with
"mdadm --add ..." should work. Or if it is a hot-swappable type, boot
without it, plug it in, then add it back.
--
Les Mikesell
lesmikesell@xxxxxxxxx
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
