Scott Silva <ssilva@xxxxxxxxxxxx> wrote:
on 2/4/2008 2:43 PM Joseph L. Casale spake the following:
>> Create a swap lv in the vg you created out of /dev/md1, assuming /dev/md0 is /boot.
>>
>> -Ross
>
> Oh, I thought it wasn’t good to run swap inside software raid? If I was wrong,
I assume this is beneficial since if one of the HD’s tanks while its running,
it will survive the failure and not need to reboot?
>
> Thanks!
> jlc
That is an old assumption from the infancy of software raid, less than optimal
installed ram, and slower processors. When ram was expensive, you used more
swap because it was cheaper. But ram is so much cheaper now that it make no
sense to run a machine that needs to touch swap except in an emergency.
Not really a valid assumption about install enough memory and swap won't
get used. *nixes have a design feature that swaps out programs that
aren't used "just in case" the some other program needs the space. Sun
workstations back in the '80s and '90s used to be the worst at this. It
was faster to shutdown at night and restart in the morning since leaving
the system up all night would result in most everything getting swapped
out to disk "just in case" the space would be needed. Try to use the
system in the morning and it would be busy swapping everything back into
RAM for quite a while.
So with 2GB of RAM on my desktop, I still see 144K of swap getting used
with me generating very little activity as I read my e-mail. If my swap
"went away", I would have a problem if Linux tried to swap back in
whatever that 144k of program is. Better to have swap on a RAID volume.
Cheers,
Dave
--
Politics, n. Strife of interests masquerading as a contest of principles.
-- Ambrose Bierce
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
