I've asked this on the Xen users list, but had no response so far:
I'm running CentOS 5.1 with all current updates:
xen-libs-3.0.3-41.el5
xen-3.0.3-41.el5
kernel-xen-devel-2.6.18-53.1.4.el5
kernel-xen-2.6.18-53.1.4.el5
and have a domU config file from another (5.0) server which works. The
difference is that on the new machine I want to use routed rather than
bridged networking. In bridging mode the domU works fine, but I
can't use bridging on this particular server because of the external
network configuration.
I have modified /etc/xen/config.sxp, commenting out
(network-script network-bridge)
(vif-script vif-bridge)
and uncommenting
(network-script network-route)
(vif-script vif-route)
I've also changed the vif line in the domU config file to:
vif = [ 'ip=aaa.bbb.ccc.ddd, vifname=veth1' ]
The domU now boots, but has no eth0 interface (the driver doesn't load
in the domU because it can't find a suitable device).
Is there anything obvious I might have done wrong or missed out? There
are no ethernet-related or network device errors in the logs that I can
see.
James
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
