On Tue, 25 Dec 2007, Robert Moskowitz wrote:
Frank Cox wrote:
On Tue, 25 Dec 2007 17:37:32 -0500
Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> wrote:
Sense Key: 0x2 Not Ready, Segment 0
Get some canned air and blow the dirt off of the sensor in the drive.
No change.
The drive is the coffee mug tray style. so even opening the plastic housing
for the drive does not let me 'see' the sensor, but I used a lot of canned
air and no change in behaviour....
Perhaps I have to go out to the drug store and buy one of those drive lens
cleaner disks?
Have you tried removing/reseating the data cable on both ends? I've seen
this work a handful of times. Also, SCSI or other? If SCSI, is it
properly terminated, and with the correct ID? I once replaced a SCSI hard
drive, and due to some technical change that completely baffled me, using
the same cable, and ensuring IDs were all correct (unchanged), could not
get the system to properly boot? In the end, a colleague with similar
knowledge ended up relocating the SCSI terminator on the cable itself. No
reason why it needed to be relocated, but that solved the problem.
Try cabling and see what happens...
Scott
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
