Frank Cox wrote:
On Tue, 25 Dec 2007 07:30:51 -0500
Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> wrote:
So what am I missing configuration-wise?
Does k3b work? (You can use k3b on a Gnome system -- I do it all the time.)
No it does not.
It prompts me for media, even if I preload the disk before start k3b.
If I 'force' I get a failure and this is the details (I see a message in
the gui error window about using TAO?):
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.4-13.el5.centos CentOS
QT Version: 3.3.6
Kernel: 2.6.18-53.1.4.el5
Devices
-----------------------
HP CD-Writer+ 8200f 1.0A (/dev/scd0, ) at [CD-R; CD-RW; CD-ROM] [Error]
[SAO; TAO; RAW; SAO/R96R; RAW/R16; RAW/R96R]
COMPAQ CD-ROM CRN-8241B 2.23 (/dev/hdc, ) at [CD-ROM] [Error] [None]
Used versions
-----------------------
cdrecord: 2.1
cdrecord
-----------------------
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code
version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 8200f'
Revision : '1.0A'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: no
error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.017s timeout 200s
/usr/bin/cdrecord: No disk / Wrong disk!
Track 01: data 528 MB
Total size: 606 MB (60:05.53) = 270415 sectors
Lout start: 606 MB (60:07/40) = 270415 sectors
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/scd0 speed=4 -dao -eject -data
/root/CentOS-5.1-i386-bin-6of6.iso
=================================
Note that this is a USB device.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
