Dear All,
I am using the following rules in firewall scripts
/sbin/iptables -F INPUT
/sbin/iptables -F OUTPUT
/sbin/iptables -F FORWARD
/sbin/iptables -F RH-Firewall-1-INPUT
# Default Rule
/sbin/iptables -P OUTPUT ACCEPT
/sbin/iptables -P INPUT ACCEPT
/sbin/iptables -P FORWARD ACCEPT
Rsync Source NAT rules is
iptables -t nat -A POSTROUTING -p tcp -s 192.168.13.179 --dport
873 -j SNAT --to-source 192.168.13.83:873
192.168.13.179 is eth0 ipv4 ipaddress and 192.168.13.83 is eth0
ipv6 ipaddress
The following rules is working fine
But the problem is at every rsync trigger we will restart the iptables
and firewall scripts, then only it will works
If the services are not restart then it will send the following error
message
"rsync: failed to connect to 192.168.13.100: Connection timed out (110)
rsync error: error in socket IO (code 10) at clientserver.c(94)"
I need to solve the following "iptables and firewall restart" issue.
Can some one throw light on this.
Regards
-S.Balaji
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
