Re: network interface activation order

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fri, 2007-11-30 at 12:03 -0500, Matt Hyclak wrote:
> On Fri, Nov 30, 2007 at 08:51:50AM -0800, John R Pierce enlightened us:
> > Graham Johnston wrote:
> > >I am using CentOS as a firewall/router.  I am using bonded interfaces,
> > >vlan interfaces, and bridge interfaces.  My problem currently is that on
> > >boot the system is attempting to activate the bridge interface before
> > >it's bonded-vlan members have been created.  What this means is that the
> > >bridge is created but not activated.
> > >
> > >Is there anyway for me to influence the activation order and have bridge
> > >interfaces dealt with last?
> > >  
> > 
> > there's probably a better way to do this, but what I've done in the past 
> > is to create special firewall related kinda stuff like your'e describing 
> > in my own script thats run quite late in the init sequence, usually from 
> > rc2.d/S99myfirewall  or even from /etc/rc.d/rc.local
> > 
> > 
> 
> Yes, there is probably a better way. My initial thought was to set ONBOOT=no
> for the bridge interfaces and then bring them up in an initscript or
> rc.local later.
> 
> Looking at the network startup script (/etc/init.d/network), though, it
> looks like you can probably achieve the same effect simply by renaming the
> ifcfg-brX files to something like ifcfg-zbrX.
> 
> There is a loop to bring up interfaces that looks like:
> 
> # bring up all other interfaces configured to come up at boot time
>         for i in $interfaces; do
> 
> and $interfaces is set just above by listing all files starting with ifcfg
> and snagging the end part (e.g. eth0 or br0).
> 
> The loop figures out what kind of configuration it needs by reading the
> file, so I don't think it cares what it is named, as long as it is
> ifcfg-something. By renaming bridges to ifcfg-zbrX, it will come after
> ifcfg-vlanX and I think solve your problem.
> 
> That was work, time for lunch :-)
> 
> Matt
> 

I have already attempted naming it ifcfg-xBrVoice with no success. For
me the interfaces load in the following order, where the bridge members
are bond0.198 and bond0.199.

bond0
bond1
xBrVoice
bond0.198
bond0.199
bond0.205

Graham Johnston
Manager, Network Services
Westman Communications Group
204.571.7225
johnstong@xxxxxxxxxxxxxx
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux