My dell SC430 came with instructions on how to set up booting from
software raid under RHEL. I can't find an online copy but this might help
http://lists.us.dell.com/pipermail/linux-poweredge/2003-July/008898.html
Normally before I move a machine from testing to production I like to do
some tests, including pulling a disk from the raid and knowing how to
recover/restore etc.
If it is going to be remotely hosted, you also need to figure out how
you are going to do it remotely.
John.
Ugo Bellavance wrote:
Christopher Chan wrote:
Ugo Bellavance wrote:
Hi,
I have a Dell poweredge 400SC here with an LSI scsi card.
I installed Centos4 a while ago and put it in a datacenter. I
rebooted many weeks after, and the machine didn't come back up. So I
went to the datacenter tonight to find out that the server was stuck
at "GRUB". Nothing more.
So I decided to re-install Centos4. The partitions were
already there, so I just made sure partitions were formatted and the
install went fine. When I rebooted, "GRUB".
I'm at this point and I don't know exactly what I could do to
diagnose furthere.
Any ideas?
grub cannot find its second stage. Are you booting from a mirrored
partition?
Yes
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
--
John Newbigin
ITS Senior Analyst / Programmer
Faculty of Information and Communication Technologies
Swinburne University of Technology
Melbourne, Australia
http://www.ict.swin.edu.au/staff/jnewbigin
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
