Re: ECC RAM Error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]




do you think replacing ram will solve our problem ?
how can I make sure it is the ram ?
This is almost certainly a hardware problem. It could be the RAM, a particular motherboard DIMM slot, or maybe the RAM is just not seated quite right in the memory slot. I have seen all three of these problems.

Try running the standalone memory tester. First run:
# yum install memtest86+

This will add a boot option of booting into memtest86+ instead of into CentOS. See if you can reproduce the error with memtest86+. That may save some time.

When you have reproduced the error, try just reseating all the DIMM's. Pop them out and push them back in firmly. Try blowing out any dust that may be in the memory slots.

Assuming it still fails, then pull out the memory DIMM's one at a time (unless you need to do it in pairs), and keep running your test until it doesn't fail. When it stops failing, try the suspicious DIMM all by itself in a different slot and see if it fails.

By doing this kind of divide and conquer, you will be able to determine whether it is the DIMM or the motherboard.

Dan
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux