Gordon McLellan escribió:
Does anyone have VLAN tagging working from within a guest on
vmware-server? I'm running a centos 4.5 guest on a centos 5 host with
vmware server 1.04 and I've tried creating vlans using both the
/etc/sysconfig/network-scripts method and just doing it from the cli
via vconfig. Either way appears to work, the OS creates the vlans,
but I think vmware's network adapter must be eating the tags or
something, since the guest is not able to talk to the real vlan on the
switch.
On the host I setup vmnet3 to be bridged to eth1. I bring eth1 up on
the host but don't configure it in anyway. Vmnet3 is configured as
eth1 on the guest as well. If I create vlans on eth1 on the host, it
is able to talk to corresponding vlans on the switch.
I'm wondering if there's some trick to get it work or some
configuration string needed in the vmx file? Right now I have the
vlans setup on the host and then bridged to vmnetX adapters for the
guests. But this is kind of messy since I have to take all my virtual
machines down to change anything.
Thanks!
Gordon
------------------------------------------------------------------------
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
My experience is purely based on xen, but I think will work with vmware too.
I think you have 2 options.
Open the vlan trunk in the host and pass the vlan trough the eth0.xxx
interfaces re-running the vmware setup and sharing the vlan interfaces
like physical or remove the vlan support form the host and pass the
trunk to the guest, because if the host has vlan installed the vlan tags
are removed from the packets.
Hope this help.
Demian.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
