John Bowden wrote:
I have a Gygabyte GA-7N400 PRO2 with a 2.6 mHz Athlon cpu. I want to set up a
central file storage for 2/3 users using 6/7 machines. A mixture of win2k, XP
and various Linux distros (my home network). It will be used to store files,
(docs, music and DVD ) for all of these machines, print server, (two
ink-jets), mail server and later on a myth tv set up. Would SAMBA be the
best option for the file and print serving ?
Probably
The mother board has 2 X IDE channels, 2 X IDE channels with raid and 2 X SATA
raid channels, that's up to 10 hard drive devices. The IDE raid chip is a
GigaRaid IT8212F chipset. It supports raid 0 or raid 1 and raid 0 + 1 and
JBOD. The SATA raid is a Silicon Image Sil3512. It supports Raid 0 or 1.
Would I get better speed performance using the chips to manage the raid or
using software raid?
Some digging on Google seems to show that the IT8212F chipset is a
"halfway" hardware RAID that offers some performance improvement over
software RAID. The Sil3512 chipset appears to be pure "fakeraid", in which
case you are better off putting it in non-RAID mode (in your BIOS) and
using software RAID.
Oh and I will be using the CentOS 5 install dvd. Any advice from the list
would be appreciated.
Thanks in advance, John
The other consideration is migration. If your motherboard dies some night,
you can take Linux software RAID disks, transplant them onto another
motherboard, jump through the setup hoops, and be back in business (because
the RAID is tied to Linux, not the motherboard). If you use the
motherboard chips for RAID at all, that will not transfer to another
motherboard (except possibly if you get another motherboard with the same
chipset and BIOS). Even if you migrate in a non-failure situation, you
will not be able to move the drives to another motherboard (mobo) until you
either
1. copy the data to another drive somewhere
install old drives on new mobo
set up drives on new mobo in new RAID array
re-sync drives
copy data from temporary drive back onto array
or
2. Set up new mobo with new drives
Do initial setup/sync on new array
copy entire drive contents from old machine to new machine over network
Compared to connecting drives to a new mobo and having a new install of
Linux recognize the array and set it up for you, there is quite a bit of
difference in convenience.
My cursory Google search did not give me any data about how much
performance improvement you would get from the hardware in the ITF8212F
chipset, as opposed to an all software solution. If mass throughput is not
your primary goal (e.g. serving multiple video streams at once without any
glitches), software RAID may take a little longer to set up at first
(though I believe you can do it as part of your install, if you answer the
questions right), it may be easier to live with later on.
Ted Miller
Indiana, USA
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
