On Fri, 2007-09-14 at 12:16 -0400, Ken Price wrote:
> What you're asking can be done a number of ways with different levels
> of complexity, the simplest using routing tables and IPTABLES.
> Instead of asking this list how to technically do this, I'd suggest
> that first you describe what you're trying to accomplish at a higher
> level. And be very specific. Then you will/should receive technical
> advice better suited to your problem.
I'll do my best to explain in more detail.
The server is running CentOS 5, and it has two NICs on it. NIC 1 is
currently active, and plugged into network A - let's say it's
10.1.1.0/255.255.255.224. NIC 2 is currently disabled. I want to
enable it, but on a different network - let's say it's
10.1.2.0/255.255.255.0.
Network A is in a fairly well locked down DMZ. I can get to only some
devices on network B from network A. Network B has full access to
Network A.
Network A and Network B each use different gateways, so I can't use
network A's gateway (which is in the DMZ) for NIC 2. NIC 2 would have
to use network B's gateway.
I need to activate both NICs because services running on the box need to
access devices on network B, and that's only possible from within
network B itself.
So, is that enough detail? I'm not sure if I've cleared things up or
just made more of a mess.
Thanks for any help.
Regards,
Ranbir
--
Kanwar Ranbir Sandhu
Linux 2.6.22.2-42.fc6 i686 GNU/Linux
15:58:18 up 19 days, 14:22, 4 users, load average: 0.28, 0.20, 0.09
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
