On Sat, 8 Sep 2007, Bart Schaefer wrote:
We have a single 3GHz P4 box w/2GB RAM running CentOS 3.8, acting as a gateway, which serves multiple IP address, having one virtual interface for each IP, e.g., eth0:1, eth0:2, etc. These interfaces/IPs are on the public internet. Each of these IP addresses is the NAT address for a different small LAN. All of these LANs are connected through a single Linksys 100Mb switch, to eth1 on the gateway. Thus, in case it's not obvious from that description, traffic from LAN X travels through through the switch to eth1 on the gateway, where iptables translates it to the IP address of eth0:X and thence out to the net. The gateway is totally idle except for handling these NATs; no other processes except the usual OS bookkeeping. All NIC and switch hardware involved is 100Mb. This all works, but we're experiencing network congestion somewhere. The LANs appear to become saturated when only about 10Mb of total traffic is passing through the public IPs. That is, we seem to be losing almost 90% of our capacity somewhere in the translation. Before we attempt to sweep this under the rug by using Gb NICs/switches for the LANs, we'd like to understand what's going on. I can't find any recent statistics for Linux NAT performance, but the older stuff I can find (e.g. 50k packets/sec for a P3-450Mhz) seems to indicate that the gateway should easily be up to the task of handling the NAT traffic. Am I wrong about this? Is there any way to diagnose whether the NAT is the bottleneck? Would we benefit from upgrading to a newer CentOS (2.6 kernel as opposed to 2.4)? Or is it more likely to be the switch, in which case what would be a recommended replacement for the Linksys?
Have you checked speed and duplex settings? If you want to make sure that your CentOS 3 is not the bottleneck, there are CentOS 4 and CentOS 5 Live CDs you could test.
Barry _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
