Ming wrote:
I got the have install a SATA HardDisk on the machine recently. But
somethings the Disk cannot be accessed. And mesg tells that it is IO
error. Is it a hardware problem or system setting problem.
Here is the message from dmesg.
sd 0:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sda, sector 27099199
EXT3-fs error (device sda1): ext3_readdir: directory #1687553
contains a hole at offset 0
Thank you.
Regards,
Ming
On 8/29/07, *Ming* <cyberming@xxxxxxxxx <mailto:cyberming@xxxxxxxxx>>
wrote:
I got the have install a SATA HardDisk on the machine recently.
But somethings the Disk cannot be accessed. And mesg tells that it
is IO error. Is it a hardware problem or system setting problem.
Here is the message from dmesg.
sd 0:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sda, sector 27099199
EXT3-fs error (device sda1): ext3_readdir: directory #1687553
contains a hole at offset 0
Thank you.
Regards,
Ming
Hi - I had some funny problems with an SATA drive. I found the problem
to be that the power connector was a little loose. I would check that
first.
Denis Becker
Information Technology - Engineering
MN State Univ., Mankato
Mankato, MN
ph: 507-389-5617
fx: 507-389-5002
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
