Re: need help on second Ethernet port (eth1) point to point connect

[Ray Leventhal <centos@xxxxxxxx>]

John R Pierce wrote:
> mcclnx mcc wrote:
>   
>> I have two DELL servers with two Ethernet ports in it.
>>  Bith servers have CENTOS 4.5 installed.  First
>> Ethernet port connect to public Ethernet line and work
>> correctly.  Second Ethernet port I connect
>> point-to-point as private Ethernet (cable direct
>> connect without router or switch).  Private Ethernet
>> use IP asddress 1.1.1.1 and 1.1.1.2.
>>   
>>     
>
>
> are you using a 'crossover' cable for this? you can't patch two NIC'
> directly together with a regular patch cable, it has to be a crossover
> cable that has Tx wired to Rx and visa versa. Also, I've had mixed
> results using crossover cabling with 1000baseT gig ethernet
>
>   
A John rightly points out, you need a 'crossover' cable when not using a
hub or switch.
It's likely a good idea to have a few crossover's in house. On the
chance you're not familiar, this link may prove helpful

http://yoda.uvi.edu/InfoTech/rj45.htm

Regards,
~Ray
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos