I'm having speed problems with the SCSI card we're using to do tape
backup. It seems to be functioning in 16 bit mode and the current
thinking is that perhaps it's using a legacy driver instead of the
correct one. The Adaptec site has a 'driver' for RHEL5 which I've
downloaded and tried to install but it seems to have a problem
installing on a CentOS-5 system.
[root@hcnas modules]# cd /proc/scsi
[root@hcnas scsi]# cat scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 08 Lun: 00
Vendor: DP Model: BACKPLANE Rev: 1.05
Type: Enclosure ANSI SCSI revision: 05
Host: scsi0 Channel: 02 Id: 00 Lun: 00
Vendor: DELL Model: PERC 5/i Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: CERTANCE Model: ULTRIUM 2 Rev: 1914
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 06 Lun: 01
Vendor: DELL Model: PV-124T Rev: 0043
Type: Medium Changer ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: Dell Model: Virtual CDROM Rev: 123
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: Dell Model: Virtual Floppy Rev: 123
Type: Direct-Access ANSI SCSI revision: 02
[root@hcnas scsi]# ll
total 0
dr-xr-xr-x 2 root root 0 Aug 3 13:21 aic79xx
-r--r--r-- 1 root root 0 Aug 3 13:21 device_info
-r--r--r-- 1 root root 0 Aug 3 13:21 scsi
dr-xr-xr-x 2 root root 0 Aug 3 13:21 sg
dr-xr-xr-x 2 root root 0 Aug 3 13:21 usb-storage
[root@hcnas scsi]# cd aic79xx/
[root@hcnas aic79xx]# ll
total 0
-rw-r--r-- 1 root root 0 Aug 3 13:09 1
-rw-r--r-- 1 root root 0 Aug 3 13:09 2
[root@hcnas aic79xx]# cat 1
Adaptec AIC79xx driver version: 3.0
Adaptec 39320A Ultra320 SCSI adapter
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
Allocated SCBs: 4, SG List Length: 128
Serial EEPROM:
0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8
0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8
0x09f4 0x0142 0x2807 0x0010 0xffff 0xffff 0xffff 0xffff
0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x0430 0xb3f3
Target 0 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 1 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 2 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 3 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 4 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 5 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 6 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Goal: 3.300MB/s transfers
Curr: 3.300MB/s transfers
Channel A Target 6 Lun 0 Settings
Commands Queued 29
Commands Active 0
Command Openings 1
Max Tagged Openings 0
Device Queue Frozen Count 0
Channel A Target 6 Lun 1 Settings
Commands Queued 20
Commands Active 0
Command Openings 1
Max Tagged Openings 0
Device Queue Frozen Count 0
Target 7 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 8 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 9 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 10 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 11 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 12 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 13 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 14 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
Target 15 Negotiation Settings
User: 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI|QAS,
16bit)
[root@hcnas ~]# rpm -e a320raid-3.00.063.5.V580A1-1
[root@hcnas ~]# rpm -ivh a320raid.rhel5.i686.rpm
Preparing... ###########################################
[100%]
1:a320raid ###########################################
[100%]
Adaptec adp94xx driver installer - V1.2.5934.0-1
Backing up all modified files to /boot/adp94xx-backup-3
Using GRUB configuration
If this is not what you want, rename your /boot/grub/grub.conf file
/boot
-rw------- 1 root root 2403411 Jul 27 14:47 initrd-2.6.18-8.1.8.el5.img
/boot/vmlinuz-2.6.18-8.1.8.el5 /boot/initrd-2.6.18-8.1.8.el5.img CentOS
(2.6.18-8.1.8.el5)
Configuration [CentOS (2.6.18-8.1.8.el5)]
/boot/vmlinuz-2.6.18-8.1.8.el5 -> 2.6.18-8.1.8.el5
****** PROBLEM *******
No prebuilt module for 2.6.18-8.1.8.el5 i686
**********************
/boot
-rw------- 1 root root 2403318 Jul 27 07:39 initrd-2.6.18-8.el5.img
/boot/vmlinuz-2.6.18-8.el5 /boot/initrd-2.6.18-8.el5.img CentOS
(2.6.18-8.el5)
Configuration [CentOS (2.6.18-8.el5)]
/boot/vmlinuz-2.6.18-8.el5 -> 2.6.18-8.el5
****** PROBLEM *******
No prebuilt module for 2.6.18-8.el5 i686
**********************
***************************************
******** NO MODULES INSTALLED *********
***************************************
Done.
error: %post(a320raid-3.00.063.5.V580A1-1.i686) scriptlet failed, exit
status 1
[root@hcnas ~]#
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
