Re: Problem with mdadm softRAID in CentOS4.5!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



israel.garcia@xxxxxxxxxxxx wrote:
I have a server running some dababases in CentOS4.5 fully updated, but
this morning I read this error in messages log:

Trover st0:Block limits 1- 16777215 bytes
******************************************************************
172.25.8.236: Servinaves
ATA ABNORMAL DTATUS 0X20DF
ATA ABNORMAL DTATUS 0X20DF
ATA ABNORMAL DTATUS 0X20DF
ata comand 0x35 timeout, stat 0xd0 host - stat 0x21
atat1: status = 0xd0 Busy
SCSI error: 2000 returns code0x8000002
current sda sense key aborted command
additional sense:Scsi parity error
end- request:110 error, devsda,sector 87008471
********************************************************************
I have mdadm  running RAID1 with two disk!

Well you used to have 2 disks... I suspect that one of them was kicked out for this error. Does 'cat /proc/mdstat' show [UU] (both active) or an '_' in one of the positions?

--
  Les Mikesell
   lesmikesell@xxxxxxxxx

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux