Re: More CentOS5 nVidia fun

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Bart Schaefer wrote:
In the vein of the "Can't get resolution higher than 1280x1024" and
"Another CentOS 5 oddity..." threads, I just installed CentOS5 w/Xen
kernel on a Sony VAIO desktop with an nVidia NV5M64 (RIVA TNT2 64 Pro)
card, using an old Samsung SyncMaster 700NF monitor.

system-config-display chose the highest possible resolution for the
monitor and Xorg did its best to drive it, but it just isn't quite
right...

Since you're not going to be using the GUI much, this won't matter, but I was able to get my nVidia Quadro 4 running pretty nice (except for some of the fancier screenasvers crashing the x server...) using the binary drivers from RPMForge.

Search the list archives for "NVidia Quadro4 200/400 NVS CentoOS 4.4" starting on April 5...

	Here is my xorg.conf file:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Nov 9 17:56:12 PST 2006

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
    FontPath        "unix/:7100"
ModulePath "/usr/X11R6/lib/modules,/usr/lib/xorg/modules/drivers,/usr/lib/xorg/modules/extensions/nvidia,/usr/lib/xorg/modules"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from data in "/etc/sysconfig/mouse"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "IMPS/2"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "DELL 1800FP"
    HorizSync       30.0 - 80.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
Option "metamodes" "CRT-0: 1280x1024 +0+0, CRT-1: 1280x1024 +1280+0; CRT-0: 1280x960 +0+0; CRT-0: 1152x864 +0+0; CRT-0: 1024x768 +0+0; CRT-0: 800x600 +0+0; CRT-0: 640x480 +0+0"
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection



--
--- David Woyciesjes
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux