On 29/04/2007, at 11:23 PM, Steven Haigh wrote:
I've recently upgraded a system from CentOS 4.4 to CentOS5, and now
when the system boots, the r8169 ethernet card doesn't come up.
After the boot sequence, if I type "ifup eth1 | ifup eth1.10 | ifup
eth1.203" then the adapter starts up ok. It seems to be something
with the boot sequence it loads the ethernet adapters a different
way around (ie 4.4 eth0 is now eth1 and eth1 is now eth0).
Is there a way to revert this? Module loading priority or similar?
Sorry, replying with a bit more info....
in /etc/modprobe.conf I have:
# cat /etc/modprobe.conf
alias eth0 via-rhine
alias eth1 r8169
also, in /etc/sysconfig/hwconf I have:
class: NETWORK
bus: PCI
detached: 0
device: eth1
driver: r8169
desc: "Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet"
network.hwaddr: 00:18:4d:79:65:47
vendorId: 10ec
deviceId: 8169
subVendorId: 1385
subDeviceId: 311a
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 14
pcifn: 0
-
class: NETWORK
bus: PCI
detached: 0
device: eth0
driver: via-rhine
desc: "VIA Technologies, Inc. VT6102 [Rhine-II]"
network.hwaddr: 00:40:63:ea:b7:21
vendorId: 1106
deviceId: 3065
subVendorId: 1106
subDeviceId: 0102
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 12
pcifn: 0
This would seem to indicate that the r8169 is certainly set as eth1,
however in the dmesg output, I see:
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xdf81c000, 00:18:4d:79:65:47, IRQ 11
eth1: VIA Rhine II at 0xfdffe000, 00:40:63:ea:b7:21, IRQ 10.
eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link
0021.
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
eth0: no IPv6 routers present
eth1: Identified chip type is 'RTL8169s/8110s'.
eth1: RTL8169 at 0xdf81c000, 00:18:4d:79:65:47, IRQ 11
This looks to indicate that the kernel is first loading the r8169
driver, then the via-rhine, then somehow the 8169 goes over to eth1 -
however this is after the system has booted and the network scripts
have run.
Anyone have a clue what's going on here? :P
--
Steven Haigh
Email: netwiz@xxxxxxxxx
Web: http://www.crc.id.au
Phone: (03) 9017 0597 - 0404 087 474
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
