Re: Problem installing CentOS 5.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



So to get rid of this error I had to completely wipe the drive with a
drive wiping util. It was not as quick and easy as wiping the beginning of
the drive. The raid controllers save their config at the end of the drive,
and not exactly at the same spot, so thats why during the install it saw
two 'formats'. I now no longer get this message, now the machine just
seems to hang during the install.

> I decided to replace  Suse 10.1 with Centos 5.0 on my file server. Im
> getting stuck right after I select the keyboard layout.
>
> I get the following message on the console:
>
> /dev/sdb: "sil" and "pdc" formats discovered ( using pdc)!
>
>
> and it just hangs there.  I think sil and pdc are referring to the
> onboard raid chips that the drive was attached to. This drive was
> used in a machine with a Silicon Image raid chip and a Promise raid
> chipset in the past, now its attached to onboard nvidia based
> controller but not in raid mode. I tried to low level format the
> drive and it sill did not work. Any ideas, I don't have this problem
> with Suse or Freebsd.
>
>
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux