Florin Andrei spake the following on 2/15/2007 9:57 AM:
> I've two machines with almost identical hardware (slightly different
> CPUs). The SATA/RAID controller is SiI 3114.
>
> One of the servers was installed a while ago by someone else, it's
> running Fedora Core 5 and RAID is enabled:
>
> # df -m
> Filesystem 1M-blocks Used Available Use% Mounted on
> /dev/dm-6 125931 2990 116441 3% /
> /dev/dm-1 99 13 81 14% /boot
> tmpfs 1012 0 1012 0% /dev/shm
> /dev/dm-2 9917 151 9254 2% /tmp
> /dev/dm-3 9917 237 9168 3% /var
> # cat /etc/modprobe.conf | tail -n 1
> alias scsi_hostadapter sata_sil
>
> I installed CentOS 4.4 64bit on the other system, but I could not enable
> RAID. The installer was always seeing 2 separate drives instead of one
> RAID device.
>
> Was it my mistake? Did I not enable the proper settings in the BIOS? (I
> tried quite a few different settings)
>
> Or is it perhaps that the CentOS kernel does not have the proper drivers
> to support SiI 3114 in RAID mode?
>
See previous posts about fakeraid.
http://linuxmafia.com/faq/Hardware/sata.html#sil
--
MailScanner is like deodorant...
You hope everybody uses it, and
you notice quickly if they don't!!!!
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
