Joachim Backes wrote:
Hi,
I'm running centos-4.4 on an SMP system with 4 dual core opterons (2.4
GHz),
and 16 GB memory.
The disk drives are 500 GB SATA-Drives.
Wondering about times for dd command performance and rm command
performance in an empty machine (the filesystem has been made with
"mkfs.ext3 /dev/sd...", nothing more)
...
Can somebody explain this weird behaviour. All comments are welcome.
Deleting files and recovering inodes in ext3 has often been considered
embarassingly slow. Many articles comparing fs peformance have pointed
that out.
How do you have your drives setup? Mirrored? JBOD? Raid controller?
I don't know a lot about how the kernel flushes buffers, but I would
guess that if you are writing to /home and /home is on the same spindle
as the rest of your OS, then you're dealing with basic contention. If
/home is a separate disk, then I'd guess that the buffers for the file
are being written to disk at different times, and the longer times
indicate a buffer flush in the middle of the write operation, slowing it
down.
I'd think that if you wanted to get a consistent set of times, you'd
make sure to sync or even unmount /home and remount it between each run,
and that should flush the kernel buffers for that filesystem and you'd
get more consistent times.
However, you're basically not really going to get better performance
than how fast you can write to your buffers, and if you wanted to run a
database, it's often recommended to turn buffering off (turning sync
option on for file system mount, IIRC(?)) so that your fs writes are
written to disk with a minimum of loss from unwritten buffers. Depending
on what the thruput for your SATA drive is, you're not going to get a
bitrate that good, but close.
What bitrate for writes are you looking for? Why are you testing?
Jed
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
