[root@gateway boot]# mkinitrd --with=sd_mod --with=scsi_mod --with=ata_piix --with=libata /root/initrd-2.6.9-42.0.8.EL.img 2.6.9-42.0.8.EL
this time it worked.
now it shows new modules. pls see below.
[root@gateway boot]# gunzip -cd initrd-2.6.9-42.0.8.EL.img |cpio -t
.
etc
etc/udev
etc/udev/udev.conf
init
lib
lib/libata.ko
lib/jbd.ko
lib/ext3.ko
lib/sd_mod.ko
lib/scsi_mod.ko
lib/ata_piix.ko
proc
loopfs
bin
bin/udevstart
bin/insmod
bin/udev
bin/hotplug
bin/nash
bin/modprobe
sbin
dev
dev/console
dev/null
dev/tty1
dev/systty
dev/tty2
dev/ram
dev/tty3
dev/tty4
sysroot
sys
2147 blocks
then I did the below steps.
[root@gateway etc]# cd /boot/
[root@gateway boot]# cp initrd-2.6.9-42.0.8.EL.img initrd-2.6.9-42.0.8.EL.img.8feb2007
[root@gateway boot]# cd
[root@gateway ~]# cp initrd-2.6.9-42.0.8.EL.img /boot/
cp: overwrite `/boot/initrd-2.6.9-42.0.8.EL.img '? y
Now it has newly rebiult /boot/initrd-2.6.9-42.0.8.EL.img.
Now I only need to restart the Server. To do that, It takes some time as users are getting emails .
After the reboot, I will let you know.
THNAK YOU VERY MUCH.
On 2/8/07, Feizhou <feizhou@xxxxxxxxxxxx> wrote:
Indunil Jayasooriya wrote:
> i removed .ko from all and then gave the below error.
>
> [root@gateway etc]# cd /boot/
>
> [root@gateway boot]# mkinitrd --with=sd_mod --with=scsi_mod
> with=ata_piix --with=libata /root/initrd- 2.6.9-42.0.8.EL.img
> 2.6.9-42.0.8.EL
> usage: mkinitrd [--version] [-v] [-f] [--preload <module>]
> [--omit-scsi-modules] [--omit-raid-modules] [--omit-lvm-modules]
> [--with=<module>] [--image-version] [--fstab=<fstab>] [--nocompress]
> [--builtin=<module>] [--nopivot] <initrd-image> <kernel-version>
>
> (ex: mkinitrd /boot/initrd-2.2.5-15.img 2.2.5-15)
>
> I think path is not set properly.
No. You missed the '--' in with=ata_piix
--
Thank you
Indunil Jayasooriya
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
