Todd Cary (todd@xxxxxxxxxxxxxxxxxx) napisał(a):
> I was able to remove the NTFS partition and repartition the HD as a type
> Linux (83). Next I created the ext3 file system.
>
> If I reboot with the USB drive attached, the boot process hangs, however
> if I turn off the drive, boot and then turn it on, all is fine.
>
> # cat /etc/fstab
>
> shows the drive, but I am not sure how to use it for a backup nor do I
> know how to access it. Any help would be appreciated. The drive is
> /dev/sda1.
>
>From terminal You can do:
mkdir /mnt/usb
mount /dev/sda1 /mnt/usb
and You will have Your stick in /mnt/usb
After You finish Your work, You can
umount /mnt/usb
hth
--
Marcin Mazurek
http://www.netsync.pl/ - :::: - nic-hdl: MM3380-RIPE
GnuPG 6687 E661 98B0 AEE6 DA8B 7F48 AEE4 776F 5688 DC89
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
