i386 or x86_64 installation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



While commenting on the subject of:
"Re: Risks of installing i386 rpms on a x86_64 CentOS 4.4 installation"
Johnny Hughes wrote:

[snip]

Personally, I would only install the x86_64 distro if I was reasonably
sure that I would not require i386 RPMS (or minimal i386 RPMS).

I just use i386 on all workstations and I use x86_64 on servers ... and
even on servers, only ones that will really be under heavy load or will
definitely not need i386 packages.

If you wouldn't mind Johnny, could you elaborate on your "Personally..." recommendation? I am running 4.4 x86_64 on AMD hardware (x64 3500+, 1G, 3x160G SATA, Gigabyte nvidia nForce-4 Ultra chipset MB w/ Gigabyte 6200 series pci-e graphics) for a "personal workstation" (otherwise known as a heavily used home computer). I just counted in yumex and I have about 77 packages with both 64 and 32 bit versions installed. One (of several) reason I switched to Centos from Mandriva is the poor support Mandriva had for 64 bit versions. Most packages in their repos were only available in 32 bit versions, and some minor OS upgrades came out only in 32bit. Centos seems to be very even-handed about the architectures (at least i836 vs. x86_64).

So far the 64/32 bit issue has only come up a couple of times, and I was able to resolve it leaving any blood (from my head) on the wall. Should I be looking at switching to 32 bit? If so, how on earth does one do that without rebuilding the machine from scratch? I still don't have this one tweaked very well, and don't have all the programs I want installed. I'd rather not start over AGAIN.

If it helps, my use is the usual email, web surfing, OpenOffice, plus desktop publishing (scribus), graphics (gimp, cinepaint, and others), and audio editing (audacity, etc) and I am trying to learn C++ (eclipse based). I run VMWare server for those programs which I am forced to use in other operating systems (and also to isolate ipcop). I am not a newbie, but neither am I an experienced old hand. I have been using Linux for my personal computing for about a year (since I got this hardware). I have had a Linux file server in my basement for about four years, but I set it up once and mostly ignored it (I think it runs RH8).

Your personal comments on my situation are welcome, as well as anyone else who wants to chime in.

Ted Miller
Indiana, USA
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux