Re: CentOS4 and older megaraid - SOLVED

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Sat, 2007-01-20 at 22:21 -0500, Matt Hyclak wrote:
> On Sun, Jan 21, 2007 at 02:15:59PM +1100, David Booth enlightened us:
> > Matt Hyclak wrote:
> > >On Sat, Jan 20, 2007 at 04:03:41PM -0600, Johnny Hughes enlightened us:
> > >>>Craig White had also written
> > >>>
> > >>>"You could probably repeat for smp kernel if you have multiple 
> > >>>processors"
> > >>>
> > >>>I will need to do that but I don't know what you mean - do I need driver 
> > >>>disks for that too?
> > >>>
> > >>You should not need driver disks for install for an smp kernel.
> > >>
> > >>The installer uses the regular kernel and not an smp kernel.
> > >
> > >Well, you need them at install time in the sense that if you want the 
> > >system
> > >to boot to the SMP kernel when your done installing, it has to be there.
> > >
> > >Matt
> > >
> > Thanks, but this doesn't help.
> > I'm installing on an HP with dual processors.
> > (And a dual processor Acer after that.)
> > 
> > Craig mentions "repeat for smp kernel" in the context of compiling the 
> > megaraid driver first with kernel-devel-xx.i586 and then again with 
> > kernel-devel-xx.686 and loading them at install time in a special sequence.
> > 
> > Is there something similar that needs to be done with 
> > kernel-smp-devel-xx.i586/686? Compile what? Load when?
> >
> > Suppose I can get the megaraid scsi driver working and Centos4.4 
> > installed and running: can I ignore the smp stuff and sort it out later?
> 
> Yes, you'll just have to boot the UP kernel until you do. It should just be
> a matter of repeating the same steps with kernel-smp-devel and putting the
> resulting .ko files in /lib/modules/xxx.ELsmp
----
yes - indeed
----
> 
> And actually, I don't think the 586 stuff is needed anymore since as of
> CentOS 4.4, the installer uses the i686 kernel unless you specifically
> request i586 on the boot line.
----
I didn't realize they had changed the boot disk - that makes the
installation significantly easier and thus the tuxyturvy web site
instructions are pretty much the ones to follow in that event as my
instructions were for dealing with a i586 kernel from the CentOS install
disks (substituting kernel versions of course since the kernel has
incremented since the original release of RHEL-4).

Craig

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux