Re: Getting and installing kernel source for 2.6.9-42.ELsmp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Charles E Campbell Jr spake the following on 12/14/2006 8:00 AM:
> Hello!
> 
> Thank you for your help!  Here's what works for me (thanks to Seth
> Bardash, Nick Webb, and Alan Cudmore), although there's a caveat:
> 
> 1. yum install kernel-devel
> 2. Obtain kernel-2.6.9-42.EL.src.rpm   (which can be obtained from
>    http://www.gtlib.gatech.edu/pub/centos/4/os/SRPMS
> 
>   Now, for the caveat:  this kernel-2.6.9-42.EL.src.rpm, NOT
>   kernel-2.6.9-42.ELsmp.src.rpm,
>   which I still haven't found.  This means that the four-cpu machine
>   needs to be brought up as a single-cpu machine.
> 
> 3. Install kernel SRPM:
>  rpm -ivh kernel-2.6.9-42.EL.src.rpm
> 
> 4. rpmbuild -bp --target $(uname -m) kernel.2.6.9-42.EL.src.rpm
> 
> 5. (kernel source is now in /usr/src/redhat/BUILD/kernel-2.6.9/linux-2.6.9)
>    cd /usr/src/redhat/BUILD/kernel-2.6.9/linux-2.6.9
> 
> Now, for the steps I used to install the arcnet driver, which is why I
> needed to do the above:
> 
> 6. make menuconfig
>    (enable arcnet modules)
>    Device Drivers:Networking Support:Network Device Support:Arcnet Devices
>    (press "M", get another menu, "M"-ize the selections there)
> 
> 7. make
> 
> 8.  Insert the modules into the current kernel:
> 
>  cd /usr/src/redhat/BUILD/kernel-2.6.9/linux-2.6.9/drivers/net/arcnet
>  insmod arcnet.ko
>  insmod arc-rawmode.ko
>  insmod com20020.ko
>  insmod com20020-pci.ko node=3 device=arc0 timeout=3 backplane=0
> clockp=0 clockm=0
>  insmod rfc1201.ko
>  ifconfig arc0 up
> 
> If anyone has some more hints about how to get ...ELsmp... instead of
> just EL, I'd appreciate it!
> 
> Hmm, Nick Webb said something about enabling SMP support, so perhaps
> I'll take another look
> for it in menuconfig...
> 
> Thank you,
> Charles Campbell
There is no kernel-2.6.9-42.ELsmp.src.rpm. SMP kernels are built from the same
source as non-smp kernels. While you are in make oldconfig, you can enable smp
just as easily as enabling the arcnet drivers. In your /boot directory are the
configs you need to run under make oldconfig to get drivers that have been
left out. You will have one for each kernel you have installed. It is an easy
way to see what has been done with a kernel you have installed.

-- 

MailScanner is like deodorant...
You hope everybody uses it, and
you notice quickly if they don't!!!!

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux