I finally fixed my drive error problem. This has been going on quite a
while. I've posted before with no success on getting this fixed.
I was getting these errors.
Dec 4 04:03:10 bikesn4x4s kernel: hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
Dec 4 04:03:10 bikesn4x4s kernel: hda: dma_intr: error=0x84 {
DriveStatusError BadCRC }
And now for the amazing smartctl -a command. The output actually had a
link that advised and directed me to a link to upgrade my firmware, which
looks to have fixed it. Simply amazing.
smartctl -a /dev/hda:
smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IBM-DTLA-307020
Serial Number: YH0YHL24292
Firmware Version: TX3OA50C
User Capacity: 20,576,747,520 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Mon Dec 4 06:45:29 2006 EST
==> WARNING: IBM Deskstar 40GV and 75GXP drives may need upgraded SMART
firmware.
Please see http://www.geocities.com/dtla_update/ and
http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42215 or
http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1496) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 14) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0007 115 115 024 Pre-fail Always
- 188 (Average 194)
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always
- 4026
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always
- 9
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline
- 0
9 Power_On_Hours 0x0012 097 097 000 Old_age Always
- 21888
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 2693
192 Power-Off_Retract_Count 0x0032 097 097 050 Old_age Always
- 4026
193 Load_Cycle_Count 0x0012 097 097 050 Old_age Always
- 4026
194 Temperature_Celsius 0x0002 183 183 000 Old_age Always
- 30
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 10
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 367
SMART Error Log Version: 1
ATA Error Count: 431 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 431 occurred at disk power-on lifetime: 21885 hours (911 days + 21
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 ac 28 f9 e1 Error: ICRC, ABRT at LBA = 0x01f928ac = 33106092
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a5 28 f9 e1 00 9d+18:33:42.900 READ DMA
c8 00 68 3d 28 f9 e1 00 9d+18:33:42.900 READ DMA
c8 00 10 3d 1a f9 e1 00 9d+18:33:42.900 READ DMA
c8 00 68 d5 19 f9 e1 00 9d+18:33:42.900 READ DMA
c8 00 08 0d 12 f9 e1 00 9d+18:33:42.900 READ DMA
Error 430 occurred at disk power-on lifetime: 21885 hours (911 days + 21
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 dc 29 f9 e1 Error: ICRC, ABRT at LBA = 0x01f929dc = 33106396
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d5 29 f9 e1 00 9d+18:33:41.900 READ DMA
c8 00 68 6d 29 f9 e1 00 9d+18:33:41.900 READ DMA
c8 00 60 ad 0d f9 e1 00 9d+18:33:41.900 READ DMA
c8 00 08 fd 5a fb e1 00 9d+18:33:41.900 READ DMA
c8 00 68 95 5a fb e1 00 9d+18:33:41.900 READ DMA
Error 429 occurred at disk power-on lifetime: 21885 hours (911 days + 21
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 1c 27 9c e1 Error: ICRC, ABRT at LBA = 0x019c271c = 27010844
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 18 05 27 9c e1 00 9d+18:33:40.900 READ DMA
c8 00 08 9d a2 9e e1 00 9d+18:33:40.900 READ DMA
c8 00 20 b5 a2 9e e1 00 9d+18:33:40.900 READ DMA
c8 00 18 35 42 9c e1 00 9d+18:33:40.900 READ DMA
c8 00 18 b5 1e a2 e1 00 9d+18:33:40.900 READ DMA
Error 428 occurred at disk power-on lifetime: 21885 hours (911 days + 21
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 dc b2 a5 e1 Error: ICRC, ABRT at LBA = 0x01a5b2dc = 27636444
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 30 ad b2 a5 e1 00 9d+18:33:40.400 READ DMA
c8 00 28 f5 d4 a2 e1 00 9d+18:33:40.400 READ DMA
c8 00 18 1d d5 a2 e1 00 9d+18:33:40.400 READ DMA
c8 00 10 3d dc a2 e1 00 9d+18:33:40.400 READ DMA
c8 00 28 25 db a2 e1 00 9d+18:33:40.400 READ DMA
Error 427 occurred at disk power-on lifetime: 21885 hours (911 days + 21
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 0c 41 b0 e1 Error: ICRC, ABRT at LBA = 0x01b0410c = 28328204
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 ed 40 b0 e1 00 9d+18:33:37.900 READ DMA
c8 00 50 d5 29 b0 e1 00 9d+18:33:37.900 READ DMA
c8 00 30 75 42 b0 e1 00 9d+18:33:37.900 READ DMA
c8 00 28 25 4a b0 e1 00 9d+18:33:37.900 READ DMA
c8 00 18 45 d5 ab e1 00 9d+18:33:37.800 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 17736
-
# 2 Short offline Completed without error 00% 15777
-
# 3 Short offline Completed without error 00% 15776
-
Device does not support Selective Self Tests/Logging
And now after upgrading the firmware:
smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IBM-DTLA-307020
Serial Number: YH0YHL24292
Firmware Version: TX3OA5AA
User Capacity: 20,576,747,520 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Mon Dec 4 18:56:58 2006 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1496) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 14) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always
- 0
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always
- 1
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always
- 9
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline
- 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always
- 0
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 1
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always
- 1
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always
- 1
194 Temperature_Celsius 0x0002 177 177 000 Old_age Always
- 31
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 10
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
