Scott Silva wrote:
> Bowie Bailey spake the following on 9/21/2006 12:56 PM:
> > One of my CentOS boxes has started giving me errors. The box is
> > CentOS-4.4 (i386) fully updated. It has a pair of SATA drives in a
> > software raid 1 configuration.
> >
> > The errors I see are:
> >
> > ata1: command 0xca timeout, stat 0x50 host_stat 0x24
> > ata1: status=0x50 { DriveReady SeekComplete }
> > Info fld=0x1e22b8, Current sda: sense key No Sense
> > ata2: command 0xca timeout, stat 0x50 host_stat 0x24
> > ata2: status=0x50 { DriveReady SeekComplete }
> > Info fld=0x1e2598, Current sdb: sense key No Sense
> >
> > If it was just coming from one drive, I would say it was a bad
> > drive, but this is happening on both drives.
> >
> > Can anyone give me a starting place to diagnose this?
>
> Cables? Connections? Power supply going bad?
Already reseated all of the cables. I even moved the drives to two
different
SATA ports on the MB.
Power supply...maybe, but not my first guess. I may swap it out later if I
can't find any other cause.
--
Bowie
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
