Re: [CentOS] Release 4.4 and MPC51 ethernet controller

["William L. Maltby" <CentOS4Bill@xxxxxxxxxxxx>]

On Sat, 2006-09-02 at 21:49 -0500, Paul wrote:
> On Thu, 2006-08-31 at 10:35 -0500, Johnny Hughes wrote:
> > On Thu, 2006-08-31 at 11:00 -0400, Jerry Geis wrote:
> > > <snip>

> I think the issue is with the Realtek RTL8211 Gigabit Ethernet
> controller that the board uses and not the nVidia chipset.
> 
> A quick solution might be to find any 10/100 NIC and see if that works
> instead.  I looked and did not find what module to load for the RTL-8211
> chip.

Knowing how the various releases of chips are often so common in a
family, maybe it matches the RTL 8169/8110s on a NIC card in one of my
machines? The driver loaded for that is r8169. Give it a try after boot.
If it works, you can pop it into your initrd, update init or configs and
make a new initrd.

> 
> Regards,
> Paul
> <snip sig stuff>

HTH
--
Bill

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos