Scott Silva wrote:
Troy Engel spake the following on 8/24/2006 10:09 AM:
Jim Perrin wrote:
That is a 4.3 kernel. Joshua said that as of *4.4* the updated bits
will be included in the kernel. 4.4 is a week or two off, I believe.
because it's related to a security update. the -42.0.2 kernel does
indeed "Just Work" with the 9550 cards, so you should be able to
I decided to give it a go on my 9500S-12 machine. I was running -34.0.2
with the downloaded driver; my machine hung on reboot to -42.0.2, but a
hard poweroff/poweron cycle fixed that nonsense; it had hung booting the
initial initrd load on the new kernel. (just some FYI for remote
rebooters).
Drivers:
2.6.9-34.0.2.ELsmp: v2.26.02.001
2.6.9-42.0.2.ELsmp: v2.26.04.010
I was previously running v2.26.04.009 tarball, so a small upgrade came
with the kernel. I just looked at 3ware.com, and this new driver version
isn't downloadable yet. Hmmm.
-te
Strange .. I have 2 systems with 9500s-4LP's and they rebooted fine.
I wonder if you guys might have different firmware revs.
I cajoled my system integrator into sending me both 9500 and 9550 cards
so I can decide which works better for us and send the extras back.
The 9550 allegedly has better performance for RAID5 so I'm hoping those
work out OK.
Cheers,
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
