Re: [CentOS] File & Print Server Connection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Collins Richey wrote:

On 7/4/06, Administrator One <admin1@xxxxxxx> wrote:

Barry L. Kline wrote:

>Administrator One wrote:
>
>
>>I have installed CentOS 4.3 final and have configured it for file and
>>print server. File server appears to function correctly in the windows
>>environment but the print server mode is not functioning properly.
>>The printer is an HP laserjet 4P and is stalled and functioning for
>>print services from the CENT Platform. Although it is set for sharing
>>and while its icon is shown in the windows environment the call up
>>requires the driver dialog to appear and selection of the driver and its >>installation goes fine, However, while the drivers are installed and the
>>HP is shown on the Cent platform thedisplay says, "hp on Global-50
>>Access denied, unable to connect". I have no idea where to go to make
>>this connection. Please advise any one.
>>
>>
>
>Check your CUPS configuration.  Evidentally you haven't allowed access
>to other machines on your network.  Either that or you have a firewall
>configured on your CentOS box and haven't given access to the IPP
>printing port.
>
>BK
>_______________________________________________
>CentOS mailing list
>CentOS@xxxxxxxxxx
>http://lists.centos.org/mailman/listinfo/centos
>
>
>
>
I have no firewall on any systems except the standalone gateway. The
printer is configured on the local machine (Cent) and set for sharing
and permission is granted for all. The test page was printed using CUPS
v1.1.x and the networked module has been invoked. Now on the windows
machine the dialog continues to state "hp on Global-50 Access denied,
unable to connect"
Please advise a correct configuration that will permit the local printer
on the Cent platform to permit print services to the windows connected
platform.


Shouldn't be necessary for samba, but for any other remote to access a
local printer you need to modify cupsd.conf to include a line like the
following:

<location>
...
Allow From 192.168.0.*                      # multiple addresses
Allow From 192.168.4                         # single address
...
</location>

HTH,

The above entry was made but without any result or changes permitting the windows platform to print for the Cent OS server. Any additional suggestions?

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux