Centos and Dual Core Opteron in a Tyan Mobo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Scott, The system will handle the load of 30 call center agents and go
up all they way to 200 agents talking simultaneously. It must also
record the phone conversations of every and all agents/calls. So
transcoding and/or I/O bottlenecks are an issue.
That's why might seem overkill.

we will definitely recompile asterisk in that box. we will not run the
bianries. However when you say compatibilities, you mean development
tools? the compiler? sendmail? apache?

thanks,
On 5/13/06, C.. Scott Heisler <Scott.Heisler@xxxxxxxxxxxxxxxx> wrote:
> I'm not sure how many users you plan on serving with that Asterisk box... that does seem like a bit of overkill though.  I've read where a couple of hundred users are served quite well with a 1ghz CPU and a gig of RAM (single CPU).
>
> CentOS has a 64bit edition for the AMD CPU.  Dual-Core does not require anything special from the OS, no more that Hyperthreading did.  The OS just sees 2 CPUs per DIE.  So, the OS will see 4 CPUs.  The only issue you will need to deal with is the 64-bit compatibilities.  I've played with the 64-bit versions and you may run into some compatibility issues for software not specifically compiled for 64-bit and have to re-compile rather than use the binaries or straight RPMs.
>
> Scott
>
> ----- Original Message -----
> From: centos-bounces@xxxxxxxxxx on behalf of Erick Perez
> Sent: Sat, 5/13/2006 12:21am
> To: CentOS mailing list
> Subject:  Centos and Dual Core Opteron in a Tyan Mobo
>
>
> Hi folks, an Asterisk (www.asterisk.org) box will be built with the
> following specs and I wanted to know if CENTOS has a built
> process/config/parameter/special distro to target the AMD Opteron Dual
> Core plataform:
>
> 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache
> 2x1024 ocz c2-6400 dual channel gold GX XTC
> 2 Seagate 16mb cache 300 GB barracuda 7200 drives
> another 2 Seagate 500 GB 16mb cache baracuda ata 7200 drives
> lite on dual layer lightscribe 16x dvd+rw/rw x48 drive
> 4 port Sata Raid controller
> raid - 10
> 2 gigabit E broadcom 10/100/100 GBE lan controller
> Tyan Thunder K8WE (S2895) motherboard or Tyan motherboards with
> ServerWorks BCM5785 Chipset (or similar from Tyan only)
>
> All your comments will be appreciated.
>
> Thanks in advance.
>
> --
>
> -------------------------------------------
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux