cdrecord issues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I have an issue with cdrecord though and I can't figure it out. I use
Webmin, which basically just creates an iso and then uses cdrecord to
burn it and it worked fine with previously installed CentOS 4 (I wiped
and reinstalled about 8 months ago).

This is the command that Webmin tries to execute...

cdrecord -v dev=0,0,0 speed=4 -isosize \
'/home/Linux/CentOS-4/CentOS-4.2-i386-bin4of4.iso'

The result of cdrecord -scanbus at bottom of email. Log of error just
below.

Help appreciated...

Craig

cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
cdrecord: No such file or directory. Cannot open '/dev/pg0'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J??rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM

# cdrecord -scanbus
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J?rg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c
1.83 04/05/20 Copyright 1997 J. Schilling').
scsibus0:
        0,0,0     0) 'COMBI   ' 'RW16x10/DVD     ' 'H1.1' Removable
CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux