lspci -n gives:
0000:00:00.0 0600: 8086:7190 (rev 01)
0000:01:00.0 0604: 8086:7191 (rev 01)
0000:07:00.0 0601: 8086:7110 (rev 08)
0000:07:00.1 0101: 8086:7111 (rev 01)
0000:07:00.2 0c03: 8086:7112
0000:07:00.3 0680: 8086:7113 (rev 08)
0000:0f:00.0 0300: 15ad:0405
0000:10:00.0 0100: 104b:1040 (rev 01)
0000:11:00.0 0200: 1022:2000 (rev 10)
0000:12:00.0 0401: 1274:1371 (rev 02)
On 3/28/06, Karanbir Singh <mail-lists@xxxxxxxxx> wrote:
>
> Ravi Kumar. wrote:
> > Hi,
> >
> > Last week I bought a new system & downloaded Centos 4.2. Here is the
> > detailed configuration of the PC:
> >
> > a) Seagate 80GB Sata HDD:
> > Model Number:ST3808110AS
> >
> > b) ASUS ADN-VM Mother board
> > c) AMD 3000+ 64bit
> > d) Other things are common & dont think they are required in this
> > context.
> >
> > I am not able to install Centos 4.2. After the step to check install
> > media, I get this message:
> >
> > "No hard drives have been found. You probably need to manually
> > choose device drivers for the installation to succeed. Would you like
> > to select drivers now?" If I choose yes, I am shown a list of device
> > drivers. I tried some of them, but nothing worked.
>
>
> sounds like the SATA interface on the motherboard is not supported by
> centos-4.2, you might want to try the 4.3 installer ?
>
> also, if you have another distro installed, can you let us know what the
> output from 'lspci -n' and 'lspci -v' is ? it might be possible to try
> and find drivers for this interface. ( could you post this info on
> http://bugs.centos.org and let us know here a url for the bug id, rather
> than posting all that info here )
>
>
> --
> Karanbir Singh : http://www.karan.org/ : 2522219@icq
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.centos.org/pipermail/centos/attachments/20060328/a2a7780f/attachment.htm
