CentOS 4.2 Mouse Tracking Unstable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I saw the following fix for this problem on 2.6.x Ubuntu systems where the
kernel parameters had no effect:

/etc/modules
  mousedev
  psmouse proto=exps

What is the equivalent for CentOS?

Charles L. Sliger,    Information Systems Engineer,    chaz@xxxxxxxxxxxxx
"no matter where you go, there you are..."

-----Original Message-----
From: centos-bounces@xxxxxxxxxx [mailto:centos-bounces@xxxxxxxxxx] On Behalf
Of Charles Sliger
Sent: Friday, January 27, 2006 6:17 PM
To: 'CentOS mailing list'
Subject: RE:  CentOS 4.2 Mouse Tracking Unstable

Getting a new KVM switch will take some explaining.
The Belkin has not been a problem up until now.
The RedHat-9 systems and The Windows-XP systems have no problems.
I would think that since CentOS is RedHat Enterprise, that this instability
would be causing real pain given that enterprise servers are much more
likely to be racked and accessed via a KVM switch.
Is this same instability being seen on the RedHat installs?
Does anyone know what changed in the mouse handling between 2.4 and 2.6?
Is it possible to revert to the previous drivers?
Regards,
Chaz

Charles L. Sliger,    Information Systems Engineer,    chaz@xxxxxxxxxxxxx
"no matter where you go, there you are..."

-----Original Message-----
From: centos-bounces@xxxxxxxxxx [mailto:centos-bounces@xxxxxxxxxx] On Behalf
Of Scot L. Harris
Sent: Friday, January 27, 2006 6:04 PM
To: 'CentOS mailing list'
Subject: RE:  CentOS 4.2 Mouse Tracking Unstable

On Fri, 2006-01-27 at 20:11, Charles Sliger wrote:
> From: centos-bounces@xxxxxxxxxx [mailto:centos-bounces@xxxxxxxxxx] On
Behalf
> Of Ignacio Vazquez-Abrams
> Sent: Friday, January 27, 2006 4:32 PM
> 
> 
> On Fri, 2006-01-27 at 16:19 -0800, Charles Sliger wrote:
> > The system is connected to the keyboard, video and mouse through a
> > Belkin OmniView Pro KVM switch.
> 
> Pass "psmouse.proto=exps" to the kernel. If that doesn't work then try
> imps, then raw.

If that does not work then get a new KVM switch.  Belkin KVM switches
have caused lots of people the same problem.  The imps setting worked on
one of my systems.

Others have reported that if you switch to the terminal and back that it
will rest things.  Have not tried that one, so I don't know if that will
work or not.  

I finally installed a KVM from iogear that works well.


_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux