RE: Broadcom NIC Binding under Centos 4.2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fri, 20 Jan 2006, ABOKHALAF, Nassri Abdellatif wrote:

> Thanks for your reply Robin,
>
>> It looks like you switch is configured to use tagged vlans.
>
>
> I must use tagged vlans.
>
> I configured the switch as your example.
>
>
>> Then add the following config file.
>> /etc/sysconfig/network-scripts/ifcfg-bond0.201
>> DEVICE=bond0.201
>
> I cannot bring this interface up. If you do ifconfig it only shows
> bond0, eth0 & eth1.
>
> Since bond0.201 does not come up, the system has no default gateway.
>
> Any clue?

show me your modprobe.conf

I think you may need to add

alias vlan 8021q
alias bond0 bonding
options bonding miimon=100 mode=<yourmodehere>


what is the output of

cat /proc/net/bonding/bond0


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux