4.2 Lockup on Fujitsu-Siemens Primergy Econel 200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hello everybody,

I'm looking for some insights on reproductible lockups with this server
so please bear the long description that follows:

Installed the 4.0 Centos than yum updated it so it results a 4.2 Centos
fully updated. During the instalation and update there were no cold
boots. That's important because if (updated Centos or not) you cold boot
the server it stucks at the "configuring hardware ... storage" step. It
does not matter the kernel version but if i choose the SMP kernels it
freezes just a little later on "configuring hardware ... audio" step.It
freezes at the same spot without kernel panicking. 
I altered the rc.sysinit file so that at the configuring hardware step
it does not load any modules. It passes (forcefully) the configuring
hardware step but it freezes at the next "Configuring kernel parameters"
step. There are no errors in the log as the k(logd) is not started at
that point.

For a change, i installed a FC2 and it's stable. However i want that
Centos running!

Please give me some advice.

CM




lspci output:
00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 0c)
00:00.1 Class ff00: Intel Corp. Memory Controller Hub Error Reporting
Register (rev 0c) 
00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port
A0 (rev 0c)  
00:03.0 PCI bridge: Intel Corp. Memory Controller Hub PCI
Express Port A1 (rev 0c)  
00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit
PCI-X Bridge (rev 02)  
00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host
Controller (rev 02)  
00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02) 
00:1d.5 PIC:
Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev
02) 
00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host
Controller (rev 02) 
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER
Hub interface to PCI Bridge (rev 0a) 
00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev
02)  
00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller (rev
02)  
00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02) 
04:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
 04:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705
Gigabit Ethernet (rev 03)

cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdb2[1] sda2[0]
      3068288 blocks [2/2] [UU]

md2 : active raid1 sdb3[1] sda3[0]
      240605440 blocks [2/2] [UU]

md0 : active raid1 sdb1[1] sda1[0]
      521984 blocks [2/2] [UU]

unused devices: <none>

cat /proc/interrupts
           CPU0       CPU1
  0:    1847902    1878624    IO-APIC-edge  timer
  1:        795        727    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  8:          0          1    IO-APIC-edge  rtc
  9:          0          0   IO-APIC-level  acpi
 12:          0         58    IO-APIC-edge  i8042
 14:       6204      11391    IO-APIC-edge  libata
 15:          1         47    IO-APIC-edge  ide1
169:          0          0   IO-APIC-level  uhci_hcd
201:          0          0   IO-APIC-level  ehci_hcd
209:     111408         88   IO-APIC-level  eth0
NMI:          0          0
LOC:    3726666    3726522
ERR:          0
MIS:          0


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux