Re: NFS Server Centos7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



NFS4.x works best with newer kernels. Maybe you could try with an elrepo kernel.

Increase the number of NFS threads on the NFS server (default is 8, which is too little).

|RPCNFSDCOUNT=32|

This is an example of kernel tunning for 10Gb network, adjust to your setup:

vm.min_free_kbytes = 1048576

      vm.swappiness = 10

      net.core.somaxconn = 4096

      # set max buffers to 64MB
      net.core.rmem_max = 67108864
      net.core.wmem_max = 67108864

      # increase Linux autotuning TCP buffer size to 32MB
      net.ipv4.tcp_rmem = 4096 87380 33554432
      net.ipv4.tcp_wmem = 4096 65536 33554432

      net.core.netdev_max_backlog = 250000

      net.ipv4.neigh.default.unres_qlen = 100

      net.ipv4.neigh.ens3f0.unres_qlen = 100

      net.ipv4.neigh.ens3f1.unres_qlen = 100

      fs.file-max = 98584540

You can calculate the buffer size with this tool:

https://www.switch.ch/network/tools/tcp_throughput/?do+new+calculation=do+new+calculation <https://www.switch.ch/network/tools/tcp_throughput/?do+new+calculation=do+new+calculation>

Enable readahead for the filesystem for instance:

blockdev --setra 16384 /dev/mapper/mpatha1

for x in sd[a-d]; do blockdev --setra 16384 /dev/$x ; done

It also helps if you disable flowcontrol on the network cards (and switches).

You could also try to reduce the maximum flow rate on the NFS host (set max rate to 8gbit for example)

It would be best to test the actual speed by iperf3 test as someone else already suggested. But since the performance it so bad, I would suspect that the source of the problem is in the the network, not the server.

Cheers,

Barbara


On 5/29/22 01:52, Valeri Galtsev wrote:


On 5/28/22 9:43 AM, Erik Frangež via CentOS wrote:
Hi guys,

we are setting NFS server on CentOS7 system. Everything working OK except speed, speed over NFS very drop... if we run dd command directly on server we are getting speed around 1,4Gbps, if we run from client connected to NFS is 200Mbps.

Do you have maybe some advice what we need to check?


Make sure you have good speed of physical connection along the whole path from server to client(s), enable Jumbo packets on all switches along the path. NFS experts will add NFS specific tuning.

Valeri

Thank you!

Best, Erik

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux