Am 05.04.22 um 23:01 schrieb Chris Adams:
Once upon a time, Leon Fauster <leonfauster@xxxxxxxxxxxxxx> said:
I guess anaconda is not ready? Because even the ks file
from the manually installed system does not work ...
I installed a 9-stream VM from kickstart today, so I don't think it is a
general issue. Did you look at the logs to see what is happening?
Also here, installing a couple CS9 VMs with the same ks file works
flawless.
For the sake of extending the view field I tested this ks with
F35 and F36 images. The same result on this hardware.
Speak, "Checking storage configuration" forever.
Also a "wipe -a /dev/nvme0n1" beforehand didn't help.
So, it must be a low-level issue specifically to this hardware (dell
notebook). Its just strange that a graphical installation done manually
works without such issue.
Someone with any idea?
Last lines of anacondas storage log:
$ tail -40 storage.log
DEBUG:anaconda.modules.storage.bootloader.base:_is_valid_location(nvme0n1p1)
returning True
WARNING:anaconda.modules.storage.bootloader.base:nvme0n1p1 not bootable
DEBUG:anaconda.modules.storage.bootloader.base:_is_valid_format(nvme0n1p1)
returning True
DEBUG:anaconda.modules.storage.bootloader.base:is_valid_stage1_device(nvme0n1p1)
returning True
DEBUG:anaconda.modules.storage.bootloader.base:Is nvme0n1p2 a valid
stage2 target device?
DEBUG:anaconda.modules.storage.bootloader.base:_is_valid_disklabel(nvme0n1p2)
returning True
DEBUG:anaconda.modules.storage.bootloader.base:_is_valid_size(nvme0n1p2)
returning True
DEBUG:anaconda.modules.storage.bootloader.base:_is_valid_partition(nvme0n1p2)
returning True
DEBUG:anaconda.modules.storage.bootloader.base:_is_valid_format(nvme0n1p2)
returning True
DEBUG:anaconda.modules.storage.bootloader.base:is_valid_stage2_device(nvme0n1p2)
returning True
DEBUG:anaconda.modules.storage.checker.utils:Available memory: 6,56 GiB
DEBUG:blivet: DeviceTree.get_device_by_path: path:
/dev/nvme0n1p1 ; incomplete: False ; hidden: False ;
DEBUG:blivet: DeviceTree.get_device_by_path returned
non-existent 512 MiB partition nvme0n1p1 (80) with non-existent efi
filesystem mounted at /boot/efi
DEBUG:blivet: DeviceTree.get_device_by_path: path:
/dev/nvme0n1p2 ; incomplete: False ; hidden: False ;
DEBUG:blivet: DeviceTree.get_device_by_path returned
non-existent 1024 MiB partition nvme0n1p2 (87) with non-existent ext4
filesystem mounted at /boot
DEBUG:blivet: DeviceTree.get_device_by_path: path:
/dev/nvme0n1p3 ; incomplete: False ; hidden: False ;
DEBUG:blivet: DeviceTree.get_device_by_path returned
non-existent 475,44 GiB partition nvme0n1p3 (73) with non-existent lvmpv
DEBUG:anaconda.modules.storage.partitioning.validate:Storage check
started with constraints {'min_ram': Size (320 MiB),
'root_device_types': set(), 'min_partition_sizes': {'/': Size (250 MiB),
'/usr': Size (250 MiB), '/tmp': Size (50 MiB), '/var': Size (384 MiB),
'/home': Size (100 MiB), '/boot': Size (512 MiB)},
'req_partition_sizes': {}, 'must_be_on_linuxfs': {'/', '/usr', '/home',
'/usr/lib', '/usr/share', '/var', '/tmp'}, 'must_be_on_root': {'/mnt',
'/sbin', '/proc', 'lost+found', '/lib', '/root', '/etc', '/bin',
'/dev'}, 'must_not_be_on_root': set(), 'reformat_allowlist': {'/boot',
'/usr', '/var', '/tmp'}, 'reformat_blocklist': {'/usr/local',
'/var/www', '/opt', '/home'}, 'swap_is_recommended': False,
'luks2_min_ram': Size (128 MiB)}.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_root.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_s390_constraints.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_partition_formatting.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_partition_sizes.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_partition_format_sizes.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_bootloader.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_gpt_biosboot.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_opal_compatibility.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_swap.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_swap_uuid.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_mountpoints_on_linuxfs.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_mountpoints_on_root.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_mountpoints_not_on_root.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_unlocked_devices_have_key.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_luks_devices_have_key.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_luks2_memory_requirements.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_mounted_partitions.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_lvm_destruction.
DEBUG:anaconda.modules.storage.partitioning.validate:Run sanity check
verify_requests.
DEBUG:anaconda.modules.storage.partitioning.validate:Storage check
finished with success.
DEBUG:anaconda.modules.storage.storage:The storage model has changed.
DEBUG:anaconda.modules.storage.storage:The partitioning CUSTOM is applied.
--
Leon
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
