Hi All,
I am having problems with a kickstart install of CentOS 8
When I try to do a completely automated install using PXE/UEFI it get to the point where it reads the kickstart config file.
Then I see the following message
"kickstart install Started cancel waiting for multipath siblings for nvme0n1"
This is what I have in the kickstart file
# Clear the Master Boot Record
zerombr
# Partition clearing information
clearpart --all --initlabel
autopart --nohome --type=lvm --fstype=xfs
================
When I install from a USB drive it works OK and I have the following in /dev/disk/by-id
lrwxrwxrwx. 1 root root 13 Jul 5 10:28 nvme-SAMSUNG_MZVL2512HCJQ-00BL7_S64KNE0R161810 -> ../../nvme0n1
lrwxrwxrwx. 1 root root 13 Jul 5 10:28 nvme-eui.002538b11102f46d -> ../../nvme0n1
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 wwn-eui.002538b11102f46d-part3 -> ../../nvme0n1p3
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-SAMSUNG_MZVL2512HCJQ-00BL7_S64KNE0R161810-part3 -> ../../nvme0n1p3
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-eui.002538b11102f46d-part3 -> ../../nvme0n1p3
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 lvm-pv-uuid-5Dg4mg-saHa-hJJ6-n5a8-MxBS-gdFi-5jPoNn -> ../../nvme0n1p3
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 wwn-eui.002538b11102f46d-part2 UNG_MZVL2512HCJQ-0-> ../../nvme0n1p2
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-SAMSUNG_MZVL2512HCJQ-00BL7_S64KNE0R161810-part2 -> ../../nvme0n1p2
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-eui.002538b11102f46d-part2 -> ../../nvme0n1p2
drwxr-xr-x. 2 root root 400 Jul 5 10:28 .
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 wwn-eui.002538b11102f46d-part1 -> ../../nvme0n1p1
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-SAMSUNG_MZVL2512HCJQ-00BL7_S64KNE0R161810-part1 -> ../../nvme0n1p1
lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-eui.002538b11102f46d-part1 -> ../../nvme0n1p1
lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-uuid-LVM-qQok4M7AOo1TxZZ42GwZcbuVNBs0hnkKtEdtLjwJQyIdxJcSvPv8TEAjwYGMv6yU -> ../../dm-0
lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-uuid-LVM-qQok4M7AOo1TxZZ42GwZcbuVNBs0hnkKAooqrczySYJyiHvUAUji9oScPN2cVi7J -> ../../dm-1
lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-name-cs_uews027-swap -> ../../dm-1
lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-name-cs_uews027-root -> ../../dm-0
lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-uuid-LVM-qQok4M7AOo1TxZZ42GwZcbuVNBs0hnkK5HZXbR2ow5xKGuD7jVe4UPzZm2qRLLXI -> ../../dm-2
lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-name-cs_uews027-home -> ../../dm-2
It's looks like that I am not doing the disk drive stuff in the config file correctly.
--
Gerard Hooton.
Senior Technical Officer
School of Engineering.
University College Cork.
College Road.
Cork.
Ireland.
Loc8: WDR-04-60G
Tel: +353 21 4902296
Mobile: +353 852813491
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
