The yum upgrade from 8.3 to 8.4 on my main machine looked as if it was
working fine so I went to have a coffee.
When I came back the screens were blank so I don't know what happened.
On rebooting the screens are still blank.
I have two graphics cards running three displays.
I have a "rescue" system on the same machine that upgraded from 8.3 to
8.4 fine. The 3 screens work fine on this.
I am not sure the upgrade completed properly. For example the new kernel:
vmlinuz-4.18.0-305.3.1.el8.x86_64
was not present in /boot. Even worse, "yum upgrade" said there was
nothing to do and would not install it. I installed the kernel package
manually. /etc/redhat-release says CentOS Linux release 8.4.2105
My main question is: Where are the config files for the screen(s). This
used to be something like /etc/X11/xorg.conf.
Since I have a working rescue system my current plan is to compare/copy
the config files.
Suggestions please as to where I should start. It is difficult to work
without a GUI. I have ssh access to the machine.
Thanks
Alan
--
Alan McRae
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
