> Hi,
>
> Is there a way to expand xfs filesystem /dev/nvme0n1p2 which is 7.8G and
> occupy the remaining free disk space of 60GB?
>
> [root@ip-10-0-0-218 centos]# df -hT --total
> Filesystem Type Size Used Avail Use% Mounted on
> devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev
> tmpfs tmpfs 1.7G 0 1.7G 0% /dev/shm
> tmpfs tmpfs 1.7G 23M 1.7G 2% /run
> tmpfs tmpfs 1.7G 0 1.7G 0% /sys/fs/cgroup
> */dev/nvme0n1p2 xfs 7.8G 7.0G 824M 90% /* ---->
> expand /dev/nvme0n1p2 which is 7.8G and occupy the remaining free disk
> space of 60GB.
> /dev/nvme0n1p1 vfat 599M 6.4M 593M 2% /boot/efi
> tmpfs tmpfs 345M 0 345M 0% /run/user/1000
> total - 16G 7.0G 8.5G 46% -
> [root@ip-10-0-0-218 centos]# fdisk -l
> GPT PMBR size mismatch (20971519 != 125829119) will be corrected by write.
> The backup GPT table is not on the end of the device. This problem will be
> corrected by write.
How did you end up in this situation? Did you copy the data from a smaller
disk to this 60G disk?
> *Disk /dev/nvme0n1: 60 GiB*, 64424509440 bytes, 125829120 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disklabel type: gpt
> Disk identifier: E97B9FFA-2C13-474E-A0E4-ABF1572CD20C
>
> Device Start End Sectors Size Type
> /dev/nvme0n1p1 2048 1230847 1228800 600M EFI System
> /dev/nvme0n1p2 1230848 17512447 16281600 7.8G Linux filesystem
> /dev/nvme0n1p3 17512448 17514495 2048 1M BIOS boot
Looks like you could move p3 to the end of the disk and then enlarge p2
and then grow the XFS on it.
I'm not sure it's a good idea to use fdisk on a GPT disk. At least in the
past this wasn't supported and I don't know how much has changed here. I
didn't touch a lot of GPT systems yet, and where I did I felt frightened
by the whole EFI stuff :)
Regards,
Simon
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
