Re: Desktop Over NFS Home Blocked By Firewalld

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 11/20/20 2:31 PM, Michael B Allen wrote:
> On Fri, Nov 20, 2020 at 2:06 PM Michael B Allen <ioplex@xxxxxxxxx> wrote:
>> Apparently I don't know how to do "that" because this:
>>
>>   # iptables -A INPUT -p tcp --sport 760 -m conntrack --ctstate
>> NEW,ESTABLISHED -j ACCEPT
>>
>> still doesn't allow the traffic through (not that I would want to
>> allow an --sport rule anyway but I'd just like to confirm that this
>> traffic is indeed responsible). What am I doing wrong here? I've also
>> tried simpler rules without conntrack or cstate but it's still not
>> getting through.
>>
>> Incidentally I added kerberos and kadmin firewalld services without
>> effect either.
> Well I've managed to resolve the issue but I'm not entirely satisfied
> with the solution. Apparently firewalld and iptables are at least
> partially mutually exclusive such that changes to iptable have no
> effect. If I add a Source Port rule using the Firewalld GUI to allow
> source port 760, it resolves the issue. But it seems pretty dubious to
> allow traffic from any particular source port. The service using port
> 760 is krbupdate but there isn't a lot of information about it on the
> net. It doesn't look like destination ports are a range because they
> have changed from 41285 and 46167. There must be something on the
> CentOS 7 side broadcasting info about what ports to use. What a PITA.
> I can't log into a desktop with an nfs home dir without punching a
> reverse hole in my firewall? That shouldn't be. 99% of people will
> just drop the pants on their machine.
>
> Mike

You didn't state what version of NFS you're using.  We're still on nfsv3.  What you're describing looks like an issue with locked.

Curious:  Try giving the login ~10 minutes to see if something 'gives up.'

On the nfs server:  rpcinfo -p

Look at nlockmgr ports & protocols.  My hunch is your dst ports reported are listed.

On CentOS 7 & 8, I lock down ports on my clients and server using /etc/nfs.conf (c8) or /etc/sysconfig/nfs (c7).  I used random high numbers, pick your own to taste:

$ egrep -v '^($|#)' /etc/nfs.conf
[general]
[exportfs]
[gssd]
use-gss-proxy=1
[lockd]
port = 43090
udp-port = 43090
[mountd]
port = 43091
[nfsdcltrack]
[nfsd]
[statd]
port = 43092
[sm-notify]

On the server and clients, I allow those corresponding ports.

I believe on centos 7 I used /etc/modprobe.d/lockd.conf to use something like:

options lockd nlm_udpport=43094 nlm_tcpport=43094

and

# cat /etc/sysconfig/nfs
LOCKD_TCPPORT=43090
LOCKD_UDPPORT=43090
MOUNTD_PORT=43091
STATD_PORT=43092
RQUOTAD_PORT=43093

Hope that helps!


_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux