On 10/02/2020 07:38 AM, H wrote: > On October 1, 2020 11:58:11 AM EDT, Bruce Ferrell <bferrell@xxxxxxxxxxxx> wrote: >> On 9/30/20 8:52 AM, H wrote: >>> 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset >> Family USB 3.0 xHCI Controller >> My system has these: >> >> 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset >> Family USB xHCI (rev 05) >> 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset >> Family USB EHCI #2 (rev 05) >> 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset >> Family USB EHCI #1 (rev 05) >> >> lspci -s 00:14.0 -v >> 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset >> Family USB xHCI (rev 05) (prog-if 30 [XHCI]) >> Subsystem: ASUSTeK Computer Inc. Device 201f >> Flags: bus master, medium devsel, latency 0, IRQ 25 >> Memory at dd600000 (64-bit, non-prefetchable) [size=64K] >> Capabilities: [70] Power Management version 2 >> Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ >> Kernel driver in use: xhci_hcd >> Kernel modules: xhci_pci >> >> lspci -s 00:1a.0 -v >> 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset >> Family USB EHCI #2 (rev 05) (prog-if 20 [EHCI]) >> Subsystem: ASUSTeK Computer Inc. Device 201f >> Flags: bus master, medium devsel, latency 0, IRQ 16 >> Memory at dd618000 (32-bit, non-prefetchable) [size=1K] >> Capabilities: [50] Power Management version 2 >> Capabilities: [58] Debug port: BAR=1 offset=00a0 >> Capabilities: [98] PCI Advanced Features >> Kernel driver in use: ehci-pci >> Kernel modules: ehci_pci >> >> lspci -s 00:1d.0 -v >> 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset >> Family USB EHCI #1 (rev 05) (prog-if 20 [EHCI]) >> Subsystem: ASUSTeK Computer Inc. Device 201f >> Flags: bus master, medium devsel, latency 0, IRQ 23 >> Memory at dd617000 (32-bit, non-prefetchable) [size=1K] >> Capabilities: [50] Power Management version 2 >> Capabilities: [58] Debug port: BAR=1 offset=00a0 >> Capabilities: [98] PCI Advanced Features >> Kernel driver in use: ehci-pci >> Kernel modules: ehci_pci >> >> These are my kernel modules: >> >> lsmod | grep usb >> btusb 53248 0 >> btrtl 16384 1 btusb >> btbcm 16384 1 btusb >> btintel 20480 1 btusb >> bluetooth 589824 41 btrtl,btintel,bnep,btbcm,rfcomm,btusb >> snd_usb_audio 278528 1 >> snd_usbmidi_lib 36864 1 snd_usb_audio >> snd_hwdep 16384 2 snd_hda_codec,snd_usb_audio >> snd_rawmidi 40960 1 snd_usbmidi_lib >> snd_pcm 143360 5 >> snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_hda_core,snd_hda_codec_hdmi >> snd 98304 23 >> snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_usb_audio,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_usbmidi_lib,snd_seq_device,snd_hda_codec_realtek,snd_pcm >> usbhid 57344 0 >> usbcore 290816 9 >> uvcvideo,usbhid,snd_usb_audio,ehci_hcd,xhci_pci,snd_usbmidi_lib,btusb,xhci_hcd,ehci_pci >> >> >> This line is important: >> >> usbcore 290816 9 >> uvcvideo,usbhid,snd_usb_audio,ehci_hcd,xhci_pci,snd_usbmidi_lib,btusb,xhci_hcd,ehci_pci >> >> Notice the last two entries: xhci_hcd and ehci_pci >> >> Those correspond to: >> >> for my two usb 2 controllers: >> >> Kernel driver in use: xhci_hcd >> Kernel modules: xhci_pci >> >> for my single usb 3 controller: >> >> Kernel driver in use: xhci_hcd >> Kernel modules: xhci_pci >> >> > >from your lspci: >> 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset >> Family USB 3.0 xHCI Controller >> >> This is the sole USB controller in your system and it's a USB 3 >> controller >> >> so... in your case let's do: >> >> sudo lspci -s 00:14.0 -v >> >> then try: >> >> sudo modprobe usbcore >> >> and repeat: >> >> sudo lspci -s 00:14.0 -v >> >> see if the Kernel driver/module lines change. If they do, plug the >> camera in and check for it to be recognized in lsusb >> >> >> >> >> _______________________________________________ >> CentOS mailing list >> CentOS@xxxxxxxxxx >> https://lists.centos.org/mailman/listinfo/centos > Thank you. Unfortunately I will not have access to this computer for some time, will let you know when I can try what you suggest. > _______________________________________________ > CentOS mailing list > CentOS@xxxxxxxxxx > https://lists.centos.org/mailman/listinfo/centos Hmm, did not have an opportunity to try your suggestion at the end of message until today - after I did a BIOS update. The BIOS update, by the way, resulted in the complete loss of recognition of the Logitech camera, regardless of which USB ports I am trying... Anyway, your suggestion above follows: #lspci -s 00:14.0 -v 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller (prog-if 30 [XHCI]) Subsystem: Lenovo Device 103c Flags: bus master, medium devsel, latency 0, IRQ 28, NUMA node 0 Memory at 43ffff10000 (64-bit, non-prefetchable) [size=64K] Capabilities: [70] Power Management version 2 Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Kernel driver in use: xhci_hcd # modprobe usbcore # lspci -s 00:14.0 -v 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller (prog-if 30 [XHCI]) Subsystem: Lenovo Device 103c Flags: bus master, medium devsel, latency 0, IRQ 28, NUMA node 0 Memory at 43ffff10000 (64-bit, non-prefetchable) [size=64K] Capabilities: [70] Power Management version 2 Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Kernel driver in use: xhci_hcd _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx https://lists.centos.org/mailman/listinfo/centos