On Fri, 2020-07-31 at 22:35 +1200, Alan McRae via CentOS wrote: > I am running an Intel x64 machine using UEFI to boot an SSD. > > Installing the latest yum update which includes grub2 and kernel > 4.18.0-193.14.2.el8_2.x86_64 renders the machine unbootable, blank > screen where grub should be, no error messages, just hangs. > > After some hours I managed to modify another bootable partition > (containing older software) and boot it from there. > > After that, I found out it is a known problem. > > The main point of this message is to make people aware of the problem > and suggest admins don't run 'yum update' until they understand the > problem and have a fix at hand. > > See 'UEFI boot blank screen post update' for a solution and directions > to the redhat article. > > Regards > > Alan > I have been punished by this bug - it is/was very nasty. I will chase up your reference but attach my trouble shooting in case its useful to anyone John
31.07.2020 Tried, successfully, to fix the boot problems on maui (Centos 7.8) To get maui to boot at all an F32 USB stick was used and the first F32 boot option edited for every boot attempt. The changes required are summarised below. insmod part_gpt insmod ext2 linux (hd2, gpt3)/vm ... 18 ... root=/dev/sda5 iinitrd (hd2, gpt3)/initramfs ... 18 ... The above booted OK with a 90 second delay if /global & /home SSDs were not plugged in. fstab was subsequently edited and the nfs related entries temporarily commented out. //------------------------------------------------------------------------------------------- The following rpms were reinstalled - it is not known if this was necessary - probably not. grub2-efi-x64 efibootmgr efivar-libs fwupdate-efi shim-x64 grub.cfg was re-created but has never been used. grub2-mkconfig -o ~/grub.cfg_post_2020_07_30 cp /boot/efi/EFI/centos/grub.cfg /boot/efi/EFI/centos/grub.cfg_pre_2020_07_30 The old grub.cfg has not been over written yet as the boot does not get that far! //------------------------------------------------------------------------------------------- The use of efibootmgr was investigated and a corrupt looking entry removed. A new entry was also created. efibootmgr -v To list entries efiboot mgr -b 2 -B 2 To remove entry 2 say efibootmgr -t 10 To increase time to edit efibootmgr -c -d /dev/sda -p1 -L ja_C7 -l '\EFI\centos\grubx64.efi' -c create new entry -d Device -p vfat partition number -L Label -l boot loader The choice for the "boot loader" option would seem to be shimx64.efi shimx64-centos.efi shim.efi grubx64.efi Which version is correct is unknown, but '\EFI\centos\grubx64.efi' was the first tried and works! The resultant entries look like this: [root@maui:/boot/efi/EFI/centos]$ efibootmgr -v BootCurrent: 0006 Timeout: 10 seconds BootOrder: 0002,0001,0000,0005,0006 Boot0000* Fedora HD(2,GPT,7c336c1e-9b29-4297-9b6f-ad7afc651a43,0x1000,0x200000)/File(\EFI\FEDORA\SHIMX64.EFI) Boot0001* Fedora HD(2,GPT,7c336c1e-9b29-4297-9b6f-ad7afc651a43,0x1000,0x200000)/File(\EFI\FEDORA\shimx64.efi) Boot0002* ja_C7 HD(1,GPT,751f986e-faf4-407e-9db0-caef0c8cd546,0x800,0x64000)/File(\EFI\centos\grubx64.efi) Boot0005* UEFI OS HD(1,GPT,751f986e-faf4-407e-9db0-caef0c8cd546,0x800,0x64000)/File(\EFI\BOOT\BOOTX64.EFI)..BO Boot0006* UEFI OS HD(2,GPT,7c336c1e-9b29-4297-9b6f-ad7afc651a43,0x1000,0x200000)/File(\EFI\BOOT\BOOTX64.EFI)..BO Conclusion The above restored maui to a normal boot state. It is probable that the "EFI BIOS" became corrupted somehow. The file \EFI\BOOT\BOOTX64.EFI in menu entry 5 does exist but this option has not been tested yet!
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx https://lists.centos.org/mailman/listinfo/centos
